Close
You have no items in your shopping cart.
Search
Filters

SMEG KDD90VXSE DOWNDRAFT HOOD 90CM - STAINLESS STEEL AND SILVER GLASS

90cm Stainless Steel and Silver Glass Island Downdraft Hood
Manufacturer: Smeg
Manufacturer part number: KDD90VXSE
£1,462.80

Energy rating: A

 

1 high performance motor, 270W

Electronic controls

Perimeter extraction

4 speeds, plus intensive (10min)

1 x 7W LED light

2 aluminium grease filters

Filter cleaning/replacement indicator

Automatic switch-off

Internal re-circulation possible

Non return valve

Vent outlet Ø 150mm

Nominal power 277W

 

 

Speed I II III IV Int
Extraction Rate IEC 61591 160 290 350 430 700
Noise Level dB(A) IEC 60704-2-13 40 53 54 60 70

 

 

 

 

NB: Downdraft extractors can be installed anywhere in a kitchen but are ideal for when a hob is situated in an island unit. The extractor is installed under the worktop directly behind, or to the side of, the hob so that when it is not in use, it can be completely hidden from view. A Downdraft extractor can be vented or recirculated. When it is vented the ducting has to be passed under the flooring, below the cupboards or along the back of the cupboards - it is important therefore to decide on the hood before refurbishment work begins. The length of the ducting will affect the extraction performance, if it has to travel too far to go to an outside wall or there are too many turns in the ducting you are advised to recirculate the extractor. 

 

This hood can be vented or recirculated with induction or ceramic hobs. However, when using with a gas hob, only venting out is possible.

 

When using with a gas hob, the hob must have a Maximum power of 12.4kW and 5 zones.

Energy rating: A

 

1 high performance motor, 270W

Electronic controls

Perimeter extraction

4 speeds, plus intensive (10min)

1 x 7W LED light

2 aluminium grease filters

Filter cleaning/replacement indicator

Automatic switch-off

Internal re-circulation possible

Non return valve

Vent outlet Ø 150mm

Nominal power 277W

 

 

Speed I II III IV Int
Extraction Rate IEC 61591 160 290 350 430 700
Noise Level dB(A) IEC 60704-2-13 40 53 54 60 70

 

 

 

 

NB: Downdraft extractors can be installed anywhere in a kitchen but are ideal for when a hob is situated in an island unit. The extractor is installed under the worktop directly behind, or to the side of, the hob so that when it is not in use, it can be completely hidden from view. A Downdraft extractor can be vented or recirculated. When it is vented the ducting has to be passed under the flooring, below the cupboards or along the back of the cupboards - it is important therefore to decide on the hood before refurbishment work begins. The length of the ducting will affect the extraction performance, if it has to travel too far to go to an outside wall or there are too many turns in the ducting you are advised to recirculate the extractor. 

 

This hood can be vented or recirculated with induction or ceramic hobs. However, when using with a gas hob, only venting out is possible.

 

When using with a gas hob, the hob must have a Maximum power of 12.4kW and 5 zones.